What are the common mistakes to avoid when installing a signal booster

Mistakes to Avoid:
* Placing Antennas Too Close: Maintaining sufficient distance between the external and internal antennas is crucial to prevent feedback loops[1]. Ideally, there should be a wall separating the antennas, and the cable should be at its full length[5].
* Ignoring Signal Testing: Always verify signal strength before and after installation. Use signal testing apps to locate the strongest signal in your area[1].
* Using Incorrect Cables: Stick to the cables provided with your booster kit to avoid compatibility issues[1].
* Skipping Maintenance: Regular inspections and cleanings are essential for long-term performance[1].
* Incorrect Placement: Poor antenna positioning can reduce signal quality. Follow installation guidelines carefully[4].
* Using an Incompatible Booster: Ensure your booster matches your network’s frequency and coverage needs. Check compatibility before purchasing[4].
* Not Understanding the Technology: It's crucial to have a clear understanding of how signal boosters work and what you aim to achieve[3].
* Forgetting Antenna Isolation: Isolation of antennas is essential. If critical attention is not paid to the correct installation of antennas and oscillation does occur, it can shut down the booster until there is no amplification at all[3].
* Too High Output Power: An output that is too high will effectively cost you much more than needed and has the potential to go into oscillation much quicker than a lower-powered unit[3].

By taking these precautions and following the installation guide, you can prevent unnecessary complications and extend the life of your signal booster system[1]. Trial and error is acceptable, but following instructions will yield the best results[5]. Don't hesitate to try different placements for your antennas and booster, as small adjustments can lead to significant improvements[2].