What are the thermal design power (TDP) values for the RX 9070 XT Red Devil and RX 7900 XTX Red Devil

PowerColor Radeon RX 9070 XT Red Devil

The RX 9070 XT Red Devil is built on AMD's RDNA 4 architecture and is known for its high-end specifications, including a boost clock of up to 3.0 GHz. This card features a robust cooling system with a triple fan setup and multiple heatpipes to manage heat effectively. However, specific details about its TDP are not explicitly mentioned in the available information. Instead, the card requires a minimum 900-watt power supply, which suggests a high power consumption profile. This requirement is likely due to the card's aggressive factory overclocks and the inclusion of three 8-pin power connectors for enhanced overclocking capabilities[1][3][4].

PowerColor Radeon RX 7900 XTX Red Devil

The RX 7900 XTX Red Devil, on the other hand, is based on AMD's RDNA 3 architecture and has a typical board power (TBP) of 355 watts. It also features a powerful cooling solution with a triple ringed-fan setup and eight heatpipes. Like the RX 9070 XT Red Devil, it requires a substantial power supply, with recommendations suggesting at least 900 watts for the entire system. This is slightly higher than AMD's official recommendation for the standard RX 7900 XTX model, which typically requires an 800-watt power supply[2][4][11].

In summary, while the exact TDP values for these cards are not detailed in the available information, their power supply requirements indicate high power consumption, especially for the Red Devil variants, which are designed for aggressive performance and overclocking.