When it comes to cleaning the Redmi Watch 5 Active, it's important to be cautious with the cleaning solutions you use to avoid damaging the device. Here are some guidelines for cleaning your smartwatch:
General Cleaning Tips
1. Power Off: Before cleaning, ensure your watch is powered off to prevent accidental button presses.
2. Remove the Watchband: If possible, remove the watchband for a more thorough cleaning. This will allow you to clean both the watch and the band separately.
3. Dust Removal: Use a soft brush or a can of compressed air to gently remove any loose dust or debris from the watch's exterior and crevices[3].
4. Screen Cleaning: For the screen, use a microfiber cloth. If the screen requires more than a dry wipe, you can dampen a corner of the cloth with a mixture of isopropyl alcohol and water. Ensure the cloth is not too wet, and use light, circular motions to avoid scratches. Avoid letting any liquid seep into the device's openings[3][10].
5. Button and Crevices: Use a cotton swab dampened with the same cleaning solution to clean around buttons and in crevices. Be cautious not to leave any fibers behind[3].
6. Rinse and Dry: If you used a cleaning solution, use a clean, damp microfiber cloth to wipe off any residue. Then, dry the watch with a soft towel[3].
Specific to Redmi Watch 5 Active
- Water Clearing Mode: The Redmi Watch 5 Active features a water clearing mode designed to remove moisture from the watch after exposure to water. To use this mode, access the quick settings, select the water clearing option, and gently shake the watch while it vibrates for about 10 to 15 seconds. This mode helps ensure the speaker function is not compromised by water[1][5].
- Avoid Chemical Solvents: Never use chemical solvents like Windex or 409 spray on electronic screens. These can damage the screen or harm the watch's water resistance[7].
- Water Resistance: The Redmi Watch 5 Active has a 5 ATM water resistance rating, meaning it can withstand being submerged up to 50 meters. However, it's still important to clean it carefully to maintain its performance[4].
Additional Tips
- Band Cleaning: If your watchband is made of leather, use a leather cleaner and conditioner. For silicone bands, you can use a diluted soap solution, but avoid using silicone-based liquids[7].
- Avoid Excessive Water: While the watch is water-resistant, avoid submerging it in water for cleaning unless absolutely necessary. If you do, ensure it is thoroughly dried afterward[7].
By following these guidelines, you can effectively clean your Redmi Watch 5 Active without damaging it. Always refer to the official user guide for specific cleaning recommendations from Xiaomi[2].
Citations:
[1] https://www.youtube.com/watch?v=4rZNqGz1cgU
[2] https://www.mi.com/uk/support/user-guide-pdf/redmi-watch-5-active
[3] https://www.did.ie/blogs/tips/how-to-clean-your-smartwatch
[4] https://www.euronics.ee/en/phones/watches/smart-watches/bhr8790gl/xiaomi-redmi-watch-5-active-matte-silver-smartwatch
[5] https://www.youtube.com/watch?v=3KAvQKD6-q4
[6] https://www.youtube.com/watch?v=oAGS4iuEZ4I
[7] https://www.pcmag.com/how-to/get-organized-how-to-clean-your-smartwatch-the-right-way
[8] https://www.youtube.com/watch?v=LC7_6mRFWn0
[9] https://www.youtube.com/watch?v=x1aegtMTgWo
[10] https://lifehacker.com/tech/how-to-clean-smart-watch
[11] https://www.youtube.com/watch?v=jz1m92XWZtA
[12] https://www.techpunt.nl/en/xiaomi-redmi-watch-5-active.html
[13] https://www.manualslib.com/manual/3660459/Xiaomi-Redmi-Watch-5-Active.html